Installation Guide for JourneyTek® Passive piezo pickups.
Here’s a great video overview and a downloadable PDF document for guidance on how to install our passive piezo pickups. The video demonstrates installation for EP001K – our passive steelstring pickup with German-made piezos. The process is similar for EP002K, EP003K, and EP004K.
Note For Ukulele Piezo Positioning: Most ukuleles have three fan braces as shown in the image below.
Position the two piezo elements of the EP003 pickup on either side of the center brace. Because of the size of most ukulele sound holes and the relative distance to the bridge plate, it is sometimes difficult to position the piezos on the bridge plate at the position (1). Alternatively you can position them in location (2). The attachment process is identical to that shown in the above video, with the exception that you will not be using a jig, but will rather hold the piezo in place with your finger until the glue dries.
Installation Guide for JourneyTek® EPS001 Dual Source Module
S001 Active Dual-Source Module
Here’s a great video overview and a downloadable PDF quick installation guide for guidance on how to install our active EPS001 series dual source pickup module. This installation guide assumes that you already have theEP001 or similar upgradeable passive piezo pickup installed on your guitar. installation time should be 5-10 minutes and requires no tools.