All products listed in this category are components, parts or supplies used with official Journey Instruments Products.
-
Journey Phosphor Bronze Coated Acoustic Strings, Light, 12-53 – JBPM-12
$8.99Set of 6 coated phosphor-bronze acoustic guitar strings. Advanced nano-coating protects from corrosion and debris buildup, and our high-tensile yield wire can withstand hundreds of assemblies on our collapsible travel guitars and still retain the high frequencies and harmonics for a rich and satisfying tone.
String diameter: 012, 016, 024, 032, 042, 053-
-
Journey Phosphor Bronze Coated Acoustic Strings, MEDIUM, 13-56 – JBPM-13
$8.99COMING SOON!!! Set of 6 medium gauge coated phosphor-bronze acoustic guitar strings. Advanced nano-coating protects from corrosion and debris buildup, and our high-tensile yield wire can withstand hundreds of assemblies on our collapsible travel guitars and still retain the high frequencies and harmonics for a rich and satisfying tone.
String diameter: 013, 017, 026, 035, 045, 056-
-
Acoustic Guitar Bone Saddles – pair of Two-AGS001
$9.99Two natural bone saddles with compensated b string for use in all Journey steel-string guitars. Saddle Dims: 70mm * 3mm * 11mm
*Please note that saddle slot width and depth may vary slightly from guitar, so these saddles may need a little sanding to get precise thickness and height. Here’s a FAQ with instructions to file down your saddle to fit properly.-
-
Acoustic Guitar Bone String Nut – pair of Two, Right hand, 1 3/4 Inch (44.5MM)-ASN001
$7.99Two natural bone nuts for 1 3/4 inch (44.5mm) guitars. This nut is for our standard neck guitar models that do not have an “N” at the end of the product name. Including, but not limited to: OF410, OF420, OF310, FF412C, FP412, RT412, RT312B etc. For Journey Instruments guitars, “N” denotes “narrow string spacing, which is 1 11/16” or 43mm, and these guitars are NOT compatible with this nut. This is for use with non “N” model Journey Instruments guitars.
- Please note you will likely need to sand down this nut to get proper string height as each guitar is a little different.
- Nut height :9mm
-
-
Two Narrow Steel String Bone Nuts (1 11/16 inch, 43mm)-ASN002
$7.99Two natural bone nuts for 1 11/16 inch (43mm) guitars. This nut is for our NARROW neck steel string guitar models that have an “N” at the end of the product name. Including, but not limited to: OF410N, OF420N, OF310N, FF412CN, FP412N, RT412N, RT312BN, PJ410N, JF410N etc. For Journey Instruments guitars, “N” denotes “narrow string spacing, which is 1 11/16″ or 43mm, and these guitars ARE compatible with this nut. This nut will not work with guitars designed for 1 3/4” (44.5mm) nuts.
- Please note you will likely need to sand down this nut to get proper string height as each guitar is a little different.
- Nut height :9mm
-
-
1.75 inch LEFTY nut string retainer-GSR001L
$29.99Proprietary two-piece string retainer (with 2 screws) for use on all Overhead travel guitars with 1.75″ nut width, for both wood or carbon fiber. POM Material, two-piece.
*This is an upgraded design with increased thickness and strength to replace thinner string retainers used on earlier models. This is suitable as a retainer replacement for OF410, OF420, OF310, OF510, OF660 and all colored carbon guitars. It is not suitable for gutiars with narrow nuts, namely OF410N – or any collapsible guitar with “N” as the last letter.Note: Lefty string retainers are produced via CNC on a one-off basis, which results in a much higher retail price.
-
-
1.75 inch nut string retainer-GSR001
$4.99Proprietary two-piece string retainer (with 2 screws) for use on all Overhead travel guitars with 1.75″ nut width, for both wood or carbon fiber. POM Material, two-piece.
*This is an upgraded design with increased thickness and strength to replace thinner string retainers used on earlier models. This is suitable as a retainer replacement for OF410, OF420, OF310, OF510, OF660 and all colored carbon guitars. It is not suitable for gutiars with narrow nuts, namely OF410N – or any collapsible guitar with “N” as the last letter.-
-
4 String Bass Nut String Retainer – GSR002
$4.99Proprietary two-piece string retainer (with 2 screws) for use on all Overhead travel bass guitars for both wood or carbon fiber. POM Material, two-piece.
*This is an upgraded design with increased thickness and strength to replace thinner string retainers used on earlier models. This is suitable as a retainer replacement for OB660, OB660M, OB660F, OB660FM, OB660R2, OB660P1, OB660G1.-
-
Ebony Bridge Pin Sets for Bass Guitar – 5 pack – BD051
$9.99Set of 4+1 ebony bridge pins for acoustic bass. We sell these in sets of 5 just in case you lose a pin. The maximum diameter of bridge pins towards the top is 8mm-8.20mm. The Maximum diameter of the bridge pins toward the bottom is 6mm. Tapered length of the bridge pins is 19mm.
-
-
Ebony Bridge Pin Sets for Steel String Guitar – 7 pack-BD050
$9.99Set of 6+1 ebony bridge pins for acoustic steel string guitar. We sell these in sets of 7 just in case you lose a pin.The maximum diameter of bridge pins towards the top is 5.1mm-5.4mm.The Maximum diameter of the bridge pins toward the bottom is 4mm. Tapered length of the bridge pins is 21.5mm.
-
-
Endpin Jack Strap Button Lock-SL01
$12.99This chrome-plated strap button extension provides a wider flange for a more secure strap attachment. Compatible with all Journey Instruments Pickups produced after 2020. Compatible with pickup jacks with these thread specifications:
-
-
First Class GA Series Shim Kit – SK003
$3.99This is a shim kit for use with Overhead and First Class Parlor guitar. It works with models such as FF412, FF422, FF412C, FF422C, and all similar models with Narrow necks (those with “N” as the last letter in the Product Number).
These shims can be used temporarily and can be reconfigured according to how your guitar changes with temperature and humidity. They can also be glued for permanent installation.
For installation instructions, visit our Shim Kit Installation page here: https://journeyinstruments.com/shim-kit-installation-guide/
-
