Bass Tuners x 2 Right Side-TBR001
Two right-side chrome mini-bass tuners compatible with all Journey Instruments collapsible base guitars. Open Gear, ratio 1:24, with screws and washers.
* for a full set you need to purchase x 2 left side tuners
Two natural bone nuts for 1 3/4 inch (44.5mm) guitars. This nut is for our standard neck guitar models that do not have an “N” at the end of the product name. Including, but not limited to: OF410, OF420, OF310, FF412C, FP412, RT412, RT312B etc. For Journey Instruments guitars, “N” denotes “narrow string spacing, which is 1 11/16” or 43mm, and these guitars are NOT compatible with this nut. This is for use with non “N” model Journey Instruments guitars.
- Please note you will likely need to sand down this nut to get proper string height as each guitar is a little different.
- Nut height :9mm
Proprietary two-piece string retainer (with 2 screws) for use on all Overhead travel bass guitars for both wood or carbon fiber. POM Material, two-piece.
*This is an upgraded design with increased thickness and strength to replace thinner string retainers used on earlier models. This is suitable as a retainer replacement for OB660, OB660M, OB660F, OB660FM, OB660R2, OB660P1, OB660G1.
This is a shim kit for use with Overhead and First Class Parlor guitar. It works with models such as FF412, FF422, FF412C, FF422C, and all similar models with Narrow necks (those with “N” as the last letter in the Product Number).
These shims can be used temporarily and can be reconfigured according to how your guitar changes with temperature and humidity. They can also be glued for permanent installation.
For installation instructions, visit our Shim Kit Installation page here: https://journeyinstruments.com/shim-kit-installation-guide/