Two Narrow Steel String Bone Nuts (1 11/16 inch, 43mm)-ASN002
Two natural bone nuts for 1 11/16 inch (43mm) guitars. This nut is for our NARROW neck steel string guitar models that have an “N” at the end of the product name. Including, but not limited to: OF410N, OF420N, OF310N, FF412CN, FP412N, RT412N, RT312BN, PJ410N, JF410N etc. For Journey Instruments guitars, “N” denotes “narrow string spacing, which is 1 11/16″ or 43mm, and these guitars ARE compatible with this nut. This nut will not work with guitars designed for 1 3/4” (44.5mm) nuts.
- Please note you will likely need to sand down this nut to get proper string height as each guitar is a little different.
- Nut height :9mm
Set of 6+1 ebony bridge pins for acoustic steel string guitar. We sell these in sets of 7 just in case you lose a pin.The maximum diameter of bridge pins towards the top is 5.1mm-5.4mm.
Set of 4+1 ebony bridge pins for acoustic bass. We sell these in sets of 5 just in case you lose a pin. The maximum diameter of bridge pins towards the top is 8mm-8.20mm.
Proprietary two-piece string retainer (with 2 screws) for use on all Overhead travel bass guitars for both wood or carbon fiber. POM Material, two-piece.
*This is an upgraded design with increased thickness and strength to replace thinner string retainers used on earlier models. This is suitable as a retainer replacement for OB660, OB660M, OB660F, OB660FM, OB660R2, OB660P1, OB660G1.