Locking Journey Chrome 18:1 Tuners Left x 3-TAL001
Three left-side chrome Journey Instruments locking chrome mini tuners. Closed gear, ratio 1:18, with screws and washers.
* This is 3 Left-side tuners only. For a full set you need to purchase x 3 right tuners.
Proprietary two-piece string retainer (with 2 screws) for use on all Overhead travel guitars with 1.75″ nut width, for both wood or carbon fiber. POM Material, two-piece.
*This is an upgraded design with increased thickness and strength to replace thinner string retainers used on earlier models. This is suitable as a retainer replacement for OF410, OF420, OF310, OF510, OF660 and all colored carbon guitars. It is not suitable for gutiars with narrow nuts, namely OF410N – or any collapsible guitar with “N” as the last letter.
Two natural bone nuts for 1 11/16 inch (43mm) guitars. This nut is for our NARROW neck steel string guitar models that have an “N” at the end of the product name. Including, but not limited to: OF410N, OF420N, OF310N, FF412CN, FP412N, RT412N, RT312BN, PJ410N, JF410N etc. For Journey Instruments guitars, “N” denotes “narrow string spacing, which is 1 11/16″ or 43mm, and these guitars ARE compatible with this nut. This nut will not work with guitars designed for 1 3/4” (44.5mm) nuts.
- Please note you will likely need to sand down this nut to get proper string height as each guitar is a little different.
- Nut height :9mm
Proprietary two-piece string retainer (with 2 screws) for use on all Overhead travel bass guitars for both wood or carbon fiber. POM Material, two-piece.
*This is an upgraded design with increased thickness and strength to replace thinner string retainers used on earlier models. This is suitable as a retainer replacement for OB660, OB660M, OB660F, OB660FM, OB660R2, OB660P1, OB660G1.
This is a shim kit for use with Overhead, Overhead+, and First Class Parlor guitar. It works with models such as OF410, OF420, OF310, OF412, OF312, OF422, FP412, FP422, FP412, FP412B, and all similar models with Narrow necks (those with “N” as the last letter in the Product Number).
These shims can be used temporarily and can be reconfigured according to how your guitar changes with temperature and humidity. They can also be glued for permanent installation.
For installation instructions, visit our Shim Kit Installation page here: https://journeyinstruments.com/shim-kit-installation-guide/