Locking Journey Chrome 18:1 Tuners Right x 3-TAR001
Three right-side chrome Journey Instruments locking chrome mini tuners. Closed gear, ratio 1:18, with screws and washers.
* This is 3 right-side tuners only. For a full set you need to purchase x 3 left tuners.
One custom truss rod cover for all wood collapsible cassical travel guitars. Fits all Overhead and First Class collapsible classical travel guitars including: OC520, OC522, FC522
Includes one Mahogany cover and 3 screws.
Proprietary two-piece string retainer (with 2 screws) for use on all Overhead travel guitars with 1.75″ nut width, for both wood or carbon fiber. POM Material, two-piece.
*This is an upgraded design with increased thickness and strength to replace thinner string retainers used on earlier models. This is suitable as a retainer replacement for OF410, OF420, OF310, OF510, OF660 and all colored carbon guitars. It is not suitable for gutiars with narrow nuts, namely OF410N – or any collapsible guitar with “N” as the last letter.
Set of 4+1 ebony bridge pins for acoustic bass. We sell these in sets of 5 just in case you lose a pin. The maximum diameter of bridge pins towards the top is 8mm-8.20mm.
Two natural bone nuts for 1 11/16 inch (43mm) guitars. This nut is for our NARROW neck steel string guitar models that have an “N” at the end of the product name. Including, but not limited to: OF410N, OF420N, OF310N, FF412CN, FP412N, RT412N, RT312BN, PJ410N, JF410N etc. For Journey Instruments guitars, “N” denotes “narrow string spacing, which is 1 11/16″ or 43mm, and these guitars ARE compatible with this nut. This nut will not work with guitars designed for 1 3/4” (44.5mm) nuts.
- Please note you will likely need to sand down this nut to get proper string height as each guitar is a little different.
- Nut height :9mm