If you want to install our pickups and you’re working with a pinless bridge (as used in ukuleles, Breedlove or Takamine type guitars), you can search on YouTube for “under bridge pickup instal on pinless bridge” and one of the top results show how you can drill into the saddle slot to use a jig for positioning the piezos on…

No. No bridge ground is needed in any of our passive pickup systems.

The three EP001 pickup elements are 20mm in diameter, so as long as the bridge plate has more than 60mm of width, and about 18mm between the bridge pin holes and the sound hole-facing edge of the bridge plate, and there is no bracing crossing the center of the bridge plate, the EP001K should be fine and it should work…

Our Passive Pickups: Guitar – EP001K, Classical – EP004K, Bass – EP002K, Uke EP003K (click model to see specs or order) In all of our instruments that use pickups, we use our in-house developed passive piezo pickups as our base pickup. These pickups use german-made ceramic piezo elements that are bonded to the bridge plate inside the guitar using cyanoacrylate…