Bass Tuners x 2 Left Side-TBL001
In stock
$16.99
Two left-side chrome mini-bass tuners compatible with all Journey Instruments collapsible base guitars. Open Gear, ratio 1:24, with screws and washers.
* for a full set you need to purchase x 2 right side tuners
In stock
Related Products
-
Carbon Steel String Truss Rod Cover (with 3 screws)-CTA002
$2.00One custom truss rod cover for all Journey Instruments carbon fiber steel string guitars. Fits OF660, OB660, RT660 and all colored and finish variants.
Includes one black plastic cover and 3 screws. -
Puddle Jumper Series Shim Kit – SK002
$3.99This is a shim kit for use with Overhead and First Class Parlor guitar. It works with models such as PJ410, and PJ410N and all similar models.
These shims can be used temporarily and can be reconfigured according to how your guitar changes with temperature and humidity. They can also be glued for permanent installation.
For installation instructions, visit our Shim Kit Installation page here: https://journeyinstruments.com/shim-kit-installation-guide/
-
First Class GA Series Shim Kit – SK003
$3.99This is a shim kit for use with Overhead and First Class Parlor guitar. It works with models such as FF412, FF422, FF412C, FF422C, and all similar models with Narrow necks (those with “N” as the last letter in the Product Number).
These shims can be used temporarily and can be reconfigured according to how your guitar changes with temperature and humidity. They can also be glued for permanent installation.
For installation instructions, visit our Shim Kit Installation page here: https://journeyinstruments.com/shim-kit-installation-guide/
-
Two Standard Steel String Bone Nuts (1 3/4 inch, 44.5mm)-ASN001
$7.99Two natural bone nuts for 1 3/4 inch (44.5mm) guitars. This nut is for our standard neck guitar models that do not have an “N” at the end of the product name. Including, but not limited to: OF410, OF420, OF310, FF412C, FP412, RT412, RT312B etc. For Journey Instruments guitars, “N” denotes “narrow string spacing, which is 1 11/16” or 43mm, and these guitars are NOT compatible with this nut. This is for use with non “N” model Journey Instruments guitars.
- Please note you will likely need to sand down this nut to get proper string height as each guitar is a little different.
- Nut height :9mm
