Puddle Jumper Series Shim Kit – SK002
This is a shim kit for use with Overhead and First Class Parlor guitar. It works with models such as PJ410, and PJ410N and all similar models.
These shims can be used temporarily and can be reconfigured according to how your guitar changes with temperature and humidity. They can also be glued for permanent installation.
For installation instructions, visit our Shim Kit Installation page here: https://journeyinstruments.com/shim-kit-installation-guide/
Two natural bone saddles with compensated b string for use in all Journey steel-string guitars. Saddle Dims: 70mm * 3mm * 11mm
*Please note that saddle slot width and depth may vary slightly from guitar, so these saddles may need a little sanding to get precise thickness and height.
Three left-side chrome Journey Instruments locking chrome mini tuners. Closed gear, ratio 1:18, with screws and washers.
* This is 3 Left-side tuners only. For a full set you need to purchase x 3 right tuners.
Two natural bone nuts for 1 11/16 inch (43mm) guitars. This nut is for our NARROW neck steel string guitar models that have an “N” at the end of the product name. Including, but not limited to: OF410N, OF420N, OF310N, FF412CN, FP412N, RT412N, RT312BN, PJ410N, JF410N etc. For Journey Instruments guitars, “N” denotes “narrow string spacing, which is 1 11/16″ or 43mm, and these guitars ARE compatible with this nut. This nut will not work with guitars designed for 1 3/4” (44.5mm) nuts.
- Please note you will likely need to sand down this nut to get proper string height as each guitar is a little different.
- Nut height :9mm